Power supply included

Starter Kit with Power Supply

Turn your 3D prints into real copper. Includes the starter kit, USB power supply, and step-by-step guide.

PowerUSB power supply and female extension cable
Paint2 fl oz / 60 mL
Price$19715% off$168

You also supply distilled water, battery acid, safety glasses, and polishing tools. Adult workshop use.

SDS
PrintPlating electroplating starter kit with USB power supply, paint, copper sulfate, and the plating jar

See the kit in action.

Watch the 54-second overview, from opening the box to a copper coated prototype.

Watch the full guide · 4:58Browse the guide chapters
What is included

USB power supply, USB female extension cable, conductive paint, copper sulfate, anode sheets, contact wire, plating jar, gloves, brushes, coffee filter, and the starter guide.

What you still supply

Distilled water, safety glasses, and polishing tools. Batteries and sulfuric acid are not in the box. The copper boat in the photo is an example, not an extra part.

Before you start

Keep the power supply and cable outside the bath. Adult workshop use. Read the SDS before mixing the sulfate.

Ready to turn printed plastic into plated copper?

This is the kit with the power supply. The kit without the power supply is $127.

Kit without power supplyAll products
PrintPlating electroplating starter kit with USB power supplyCopper electroplating starter kit owner pamphletA copper-plated boat held in front of the plating jar, with a gray print beside itA copper-plated boat held in front of the starter kitChart of batteries, distilled water, sulfuric acid, safety glasses, and finishing tools that are not included
Starter kit with power supply